MUG-A-2
Machine Structure
1) HT250 Machine base and ductile iron slider. Heat treatment to eliminate the stress. Not easy to deformation.
2) Grinding wheel spindle is mechanical spindle. Speed can be adjusted: 4000~6000 rpm/min. Can bear axial force.
3) Workpiece feed is controlled by servo motor to control the action of cutting amount and automatic cycle.
4) Grinding amount is controlled by touch screen and PLC; Can set adjustment password;
5) Grinding wheel speed: Automatic constant speed: 80~120m/s;
6) Drive system is ductile iron rail and HIWIN ball screw & linear guide;
7) Feed guide, slider, ball screw for automatic lubrication of the oil pump;
8) Machine is all sealed sheet metal except for loading and unloading parts to prevent the fluid leakage.
Machine Structure
1) HT250 Machine base and ductile iron slider. Heat treatment to eliminate the stress. Not easy to deformation.
2) Grinding wheel spindle is mechanical spindle. Speed can be adjusted: 4000~6000 rpm/min. Can bear axial force.
3) Workpiece feed is controlled by servo motor to control the action of cutting amount and automatic cycle.
4) Grinding amount is controlled by touch screen and PLC; Can set adjustment password;
5) Grinding wheel speed: Automatic constant speed: 80~120m/s;
6) Drive system is ductile iron rail and HIWIN ball screw & linear guide;
7) Feed guide, slider, ball screw for automatic lubrication of the oil pump;
8) Machine is all sealed sheet metal except for loading and unloading parts to prevent the fluid leakage.
